Home :: Standard Servos :: DS1250 (0.066 sec/60° - 14.3 kg-cm (198.59 oz/in) @6.8V)
Printable version

DS1250 (0.066 sec/60° - 14.3 kg-cm (198.59 oz/in) @6.8V)

DS1250 (0.066 sec/60° - 14.3 kg-cm (198.59 oz/in) @6.8V)
View detailed images (3)
SKU RC-MKS-DS1250
Quantity in stock 71 item(s) available
Dead Band 0.0008ms (Default)
Control System +Pulse Width Control
Working Frequence 1520μs / 333hz
(RX) Required Pulse 3.0~6.6 Volt Peak to Peak Square Wave
Operating Voltage 4.8~6.6 V DC Volts
Operating Temperature Range -10 to + 60 Degree C
Operating Speed (6V) 0.075 sec/60° degrees at no load
Operating Speed (6.6V) 0.066 sec/60° dagrees at no load
Stall Torque (6V) 11.7 kg-cm (162.48 oz/in)
Stall Torque (6.6V) 14.3 kg-cm (198.59 oz/in)
Motor Type Coreless Motor
Potentiometer Drive Direct Drive
Driver Type FET
Bearing Type Dual Ball Bearings
Gear Type Titanium Gears
Programmable NO
Connector Wire Length 15.0 cm (5.9 in)
Dimensions 40X20X37 mm
Weight 57.70 g ( 2.03oz)
Our price: $89.99
Quantity (71 available)

DS1250

BLS990 Aluminum upper Casing (0.030 sec/60° - 3.5 kg-cm (48.6 oz/in) @6V)
BLS990 Aluminum upper Casing (0.030 sec/60° - 3.5 kg-cm (48.6 oz/in) @6V)
$119.00
DS530 Gear Set
DS530 Gear Set
$15.00
SBEC - 2
SBEC - 2
$8.50
HBL665 Gear Set
HBL665 Gear Set
$36.50
HBL960 (0.09 sec/60° - 258.31 oz/in @8.2V)
HBL960 (0.09 sec/60° - 258.31 oz/in @8.2V)
$165.80
HV69 Gear Set
HV69 Gear Set
$15.99
HV75K-R (0.09 sec/60° - 45.82 oz/in @8.2V)
HV75K-R (0.09 sec/60° - 45.82 oz/in @8.2V)
$73.80
40mm Rudder 4mm spline Carbon horn (1.5mm carbon)
40mm Rudder 4mm spline Carbon horn (1.5mm carbon)
$6.50
Z1500H-12-1009-CHF-90 DroneCAN M5 Connector
Z1500H-12-1009-CHF-90 DroneCAN M5 Connector
$750.00