Home :: Micro Servo :: DS6125E (0.053 sec/60° - 3.25 kg-cm (45.13 oz/in) @6V)
Printable version

DS6125E (0.053 sec/60° - 3.25 kg-cm (45.13 oz/in) @6V)

DS6125E (0.053 sec/60° - 3.25 kg-cm (45.13 oz/in) @6V)

The MKS DS-6125E is part of the latest range from MKS.
Once you have tried MKS, you will know you have tried the very best!
Never has a glider servo been so accurate and tight! This is what we all have been searching for!!
The DS-6125 has a full CNC Aluminum case that has been milled to the highest of tolerances.
Details
SKU RC-MKS-DS6125E
Quantity in stock 49 item(s) available
Dead Band 0.0008 ms
Control System +Pulse Width Control
Working Frequence 1520μs / 333hz
(RX) Required Pulse 3.0~5.0 Volt Peak to Peak Square Wave
Operating Voltage 4.8~6.0 V DC Volts
Operating Temperature Range -10 to + 60 Degree C
Operating Speed (4.8V) 0.066 sec/60° degrees at no load
Operating Speed (6V) 0.053 sec/60° degrees at no load
Stall Torque (4.8V) 2.58 kg-cm (35.83 oz/in)
Stall Torque (6V) 3.25 kg-cm (45.13 oz/in)
Motor Type Coreless Motor
Potentiometer Drive Direct Drive
Driver Type FET
Bearing Type Dual Ball Bearings
Gear Type Chrome-Titanium alloy gear
Programmable No
Connector Wire Length 15.0 cm (5.89 in)
Dimensions 23X12X27.25 mm (0.9X0.47X1.07 in)
Weight 21.21 g (0.74 oz)
 
Our price: $96.79
Options
Quantity (49 available)
HV300/767 Gear Set
HBL665 (0.10 sec/60° - 211.08 oz/in @7.2V)
BLS6650 Camera Gimbal servo
HV300/767 Gear Set HBL665 (0.10 sec/60° - 211.08 oz/in @7.2V) BLS6650 Camera Gimbal servo
$32.95
$124.29
$137.49
 
HV6125E (0.05 sec/60° - 3.5 kg-cm (48.61 oz/in) @8.2V)
DS65k Gear set
X8 Metal 1.5" metal horn
HV6125E (0.05 sec/60° - 3.5 kg-cm (48.61 oz/in) @8.2V) DS65k Gear set X8 Metal 1.5" metal horn
$105.38
$18.15
$23.08
 
X6 Metal 3.5" rudder metal horn
DS/HV 1250 Gear Set
DS75K-R (0.13 sec/60° - 33.33 oz/in @6V)
X6 Metal 3.5" rudder metal horn DS/HV 1250 Gear Set DS75K-R (0.13 sec/60° - 33.33 oz/in @6V)
$26.95
$28.05
$74.79

Your cart

Cart is empty

Authentication